|
BUSBARS
NOTE:
All of Midnite Solar’s listed balance of system products qualify for the US federal tax credit when used in a new, qualifying renewable energy system.
|
|
|
|
MN1/0LBBC
MODEL OPTIONS
|
MN1/0SBBC-R (Short red)
|
$3.25
|
|
MN1/0LBBC-R (Long red)
|
$3.25
|
|
MN1/0SBBC-W (Short white)
|
$3.25
|
|
MN1/0LBBC-W (Long white)
|
$3.25
|
|
MN1/0LBBC-G (Long green)
|
$3.25
|
|
MN1/0SBBC-G (Short green)
|
$3.25
|
|
MN1/0LBBC-BLK (Long black)
|
$3.25
|
|
MN1/0SBBC-BLK (Short black)
|
$3.25
|
These busbar insulator covers help protect from accidental shorts.
|
|
MNTBB2-5
MODEL OPTIONS
|
MNTBB2-5 R
|
$26.00
|
|
MNTBB2-5 W
|
$26.00
|
|
MNTBB2-5 Blk
|
$26.00
|
MNTBB2-5 R, MNTBB2-5 W, MNTBB2-5 Blk
2/0 Busbar, insulator and cover sold as unit. Has 5 wire locations, 3 take up to #6 wire and 2 take up to 2/0 wire. Available in red, white or black. Comes with mounting screws. Made in USA, NRTL recognized.
|
|
MNTBB2-9
MODEL OPTIONS
|
MNTBB2-9 R
|
$30.00
|
|
MNTBB2-9 W
|
$30.00
|
|
MNTBB2-9 Blk
|
$30.00
|
MNTBB2-9 R, MNTBB2-9 W, MNTBB2-9 Blk
2/0 Busbar, insulator and cover sold as unit. Has 9 wire locations, 6 take up to #6 wire and 3 take up to 2/0 wire. Available in red, white and black. Comes with mounting screws. Made in USA, NRTL recognized. For red and an R, for white add a W and for black add a B to the model number.
|
|
MNTBB2-15
MODEL OPTIONS
|
MNTBB2-15R
|
$33.50
|
|
MNTBB2-15W
|
$33.50
|
|
MNTBB2-15BLK
|
$33.50
|
MNTBB2-15R, MNTBB2-15W, MNTBB2-15BLK
5" 2/0 Busbar, insulator and cover sold as unit. Has 15 wire locations, 11 take up to #6 wire and 4 take up to 2/0 wire. Available in red, white and black. Comes with mounting screws. Made in USA, NRTL recognized.
|
|
MNSBB
MODEL OPTIONS
|
MNSBB-R
|
$23.00
|
|
MNSBB-B
|
$23.00
|
|
MNSBB-W
|
$23.00
|
MNSBB-R, MNSBB-B, MNSBB-W
(Midnite Short Busbar) Shorter version of the insulated bus bars. These tin plated aluminum busbars are useful for PV+ input on the narrow OB E-Panel and for a separate PV- bus bar for
charge controllers that require them. 180 amps. Four #6 and two 1/0 wire slots. Listed for US and Canada.
|
|
MNTBB
MODEL OPTIONS
|
MNTBB-R
|
$25.00
|
|
MNTBB-B
|
$25.00
|
|
MNTBB-W
|
$25.00
|
MNTBB-R, MNTBB-B, MNTBB-W
Four 1/0 & eleven #6 useable wire slots. 180 amps. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars. Tin plated aluminum. Listed for US and Canada.
|
|
MNBIGBUSBAR
(Previous Model Num: Big Busbar Plus or Minus)
280 amps, Same busbar used in the Nottagutter. Five, 5/16 studs for battery connections.
Comes with auxiliary terminal busbar for six small wires #14-1/0.
Breaker and Busbar Torque Values
|
|
MNBCB-BUSBAR
(Previous Model Num: MNBCB Busbar)
1000amp positive or negative busbar with 3/8 inch studs. Used in the MNBCB-1000/50 and MNBCB-1000/100-Battery Combiners. Comes with red and white insulators and screws.
|
|
MNBCB-BUSBAR2K
2000amp positive or negative busbar with 3/8 inch studs. Used in the MNBCB-2000/200 Battery Combiner. Comes with red and white insulators and screws.
|
|
|
|
|
MNPV6-250 BUSBAR
Requires 2 of these for MNPV12-250
1/8" thick tin plated copper accommodates up to three 300VDC MidNite circuit breakers.
This bus bar is used in the MNPV6-250, The MNPV6-250Disco and two of them are used in the MNPV12-250
Current Rating: 168A
Breaker and Busbar Torque Values
|
|
|
|
|
MNAC BUSBAR MICRO
(Previous Model Num: MNAC Busbar (AC Micro))
2 bus bars 1/8" thick tin plated copper accommodates up to three 240VAC MidNite circuit breakers.
These bus bars are used in the MNPV6 Disco-AC Micro
Current Rating: 168A
Breaker and Busbar Torque Values
|
|
MNPV6-BREAKER-BB
(Previous Model Num: MNPV6-BREAKER-BUSBAR)
MNPV6-BREAKER-BB This .093" thick copper bus has six fingers spaced at 1/2" (13mm) intervals
Two box lugs are provided to accommodate 14-1/0 AWG wire.
Current Rating: 120A
Breaker and Busbar Torque Values
|
|
|
|
|
MNGBB-BUSBAR
MidNite ground busbar 3.45" long with Green screws! Two 1/0 & seven #6 wire slots. Comes with mounting screws. Made of tin coated aluminum. Made in USA, NRTL recognized.
Breaker and Busbar Torque Values
Current Rating: 180A
|
|
MNSBBN
(Previous Model Num: MNSBBN (NAKED) BUSBAR)
2.3" long. Two 1/0 & four #6 wire slots. 180 amps. Comes with mounting screw& nut #10-32 x 7/8". Made in USA, NRTL recognized.
Breaker and Busbar Torque Values
|
|
MNTBBN
(Previous Model Num: MNTBBN (NAKED) BUSBAR)
Without insulators. Four 1/0 & eleven #6 useable wire slots. 180 amps. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars. Tin plated aluminum. Listed for US and Canada. Comes with 10-32 screws for mounting to shunt (Uses 2 of the #6 holes mentioned above). For use with the MidNite Shunt. Busbar 4.63" UL and CSA recognized. 180 amps. Made in USA.
|
|
MNSHUNT BUSBAR
(Previous Model Num: SHUNT BUSBAR)
Mounts on 500 shunt. Same busbar used in the Nottagutter. Four 3/8 inch battery cable studs and six position aux terminal busbar. Made of tin plated copper.
Shunt sold separately. 500 Amp busbar.
Breaker and Busbar Torque Values
|
|
