Breakers
MNDC-GFP80
NON POLARIZED
|
Model
|
Price
|
Size
|
Weight
|
|
MNDC-GFP80
|
$88.00
|
1 1/2" wide, 1/4" studs for Electrical connection
|
1 lbs
|
|
Model
|
MNDC-GFP80
|
|
Price
|
$88.00
|
|
Size
|
1 1/2" wide, 1/4" studs for Electrical connection
|
|
Weight
|
1 lbs
|
DESCRIPTION:
80 amp 150VDC panel mount DC ground fault protector (NRTL listed breaker assy)
1/2 amp trip mechanism connects between battery negative and earth ground
NEC2008 requires DC-GFP's on all solar installations.
10,000 AIC
10,000 AIC
MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
Breaker Torque Value: 30 In-Lbs (3.4NM)
All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
Breaker Torque Value: 30 In-Lbs (3.4NM)
- NON POLARIZED
- Width 1.5 inches (39mm)
- Environmental Rating - Type 1 (Indoor)
- Listed for US & Canada
California Residents: Warning
ACCESSORIES
MNDC-C-SERIES - $262.00
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).
MNDC15 - $425.00
General use enclosure for 15 panel mount type breakers from 5 - 100 Amp as well as a single 125, 175 or 250 amp breaker if so desired.
General use enclosure for 15 panel mount type breakers from 5 - 100 Amp as well as a single 125, 175 or 250 amp breaker if so desired.
MNDC125 - $310.00
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC175 - $360.00
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC250 - $360.00
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC125PLUS - $380.00
MNDC Plus version of the popular MNDC
MNDC Plus version of the popular MNDC
MNDC175PLUS - $425.00
MNDC Plus version of the popular MNDC.
MNDC Plus version of the popular MNDC.
MNDC250PLUS - $425.00
MNDC Plus version of the popular MNDC.
MNDC Plus version of the popular MNDC.
MNDC175-X2 - $740.00
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC250-X2 - $740.00
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNEDCQUAD - $92.00
General use aluminum enclosure for 4 panel mount type breakers from 5 - 100 Amp.
General use aluminum enclosure for 4 panel mount type breakers from 5 - 100 Amp.