HOME

CLASSIC SL

CLASSIC

FIRMWARE

CLASSIC SIZING TOOL

FORUM

MIDNITE SOLAR

All our Classic Charge Controllers have a 5 year warranty!

So what’s the difference between MidNite’s standard Classics and the Classic SL series?

Check out the Classic and Classic SL comparison chart.

All MidNites Classics come in the same voltages, 150, 200 and 250.

CLASSIC - The standard Classics are the full featured version with Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes.

ALL STANDARD CLASSICS SPEAK IN ENGLISH!

Other languages coming soon!

CLASSIC SL - The Classic-SL seres is a simplified SOLAR ONLY version of the standard Classic with a graphics panel and ground fault. It has no arc fault or Ethernet capabilities. With a streamlined menu, these SOLAR only MPPT charge controllers are easy to setup and a breeze to install!

Recommended Accessories
	Classic Replacement Power Boards - $470.00 Replacement FET Boards for the Classic, Classic-SL and Classic Lite.

	Classic Replacement Control Boards - $350.00 Classic 150, 200, 250 replacement control board

	Local Application The MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet.

	MyMidNite My MidNite, our free, secure service allows you to view your Classic(s) when you are away from home.

	MNWBJR - $81.00 The Whiz Bang Jr is a current sense module that attaches to the standard 50mv / 500A Shunt and wires into the Classic and KID charge controllers to give Amperage readings from the shunt. To use the Whizbang Jr (MNWBjr) with any of the Classic Lites, you will either need the local app or an MNGP.

	MNGP - $225.00 MidNite Graphics Panel (Graphics display)

	MNSPD-300-DC - $135.00 The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.

	MNEDC 5A thru 100A - $27.00 5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 amp 150VDC Panel Mount. 10,000 AIC

	MNEPV BREAKERS - $22.00 150VDC din rail mount breaker available in 1 to 63 amps (13mm wide).

	MNEPV 80A or 100A - $65.00 80 or 100 amp Din rail mount breaker.

	MNEDCQUAD - $92.00 General use aluminum enclosure for 4 panel mount type breakers from 5 - 100 Amp.

	MNNWC3 - $10.75 3 foot cable for the MidNite network. Used to network MidNite products together.

	MNCCB-L or MNCCB-R - $26.00 CHARGE CONTROL BRACKETS - Right/Left - Right or left hand charge control brackets. Fits OutBack, Xantrex and MidNite MPPT controllers.

	MNCLASSIC FAN KIT - $54.00 These are replacement fans for use in the repair of the classic with a damaged or worn out fan.