DOCUMENTS - Busbars
MNBCB-BUSBAR500
MNTBB2-5
2/0 Busbar, insulator and cover sold as unit. Available in red, white or black. Comes with mounting screws. Made in USA, NRTL recognized.
MNTBB2-9
2/0 Busbar, insulator and cover sold as unit. Available in red, white and black. Comes with mounting screws. Made in USA, NRTL recognized.
MNTBB2-15
5" 2/0 Busbar, insulator and cover sold as unit. Available in red, white and black.
MNSBB
(Midnite Short Busbar) Shorter version of the insulated bus bars. These are useful for PV+ input on the narrow OB E-Panel and for a separate PV- bus bar for charge controllers that require them. 180 amps. Four #6 and two 1/0 wire slots.
MNTBB
Four 1/0 & eleven #6 useable wire slots. 180 amps. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars.
MNBIGBUSBAR
280 amps, Same busbar used in the Nottagutter. Five, 5/16 studs for battery connections.
Comes with auxiliary terminal busbar for six small wires #14-1/0.
MNBCB-BUSBAR
1000amp positive or negative busbar with 3/8 inch studs. Used in the MNBCB-1000/50 and MNBCB-1000/100-Battery Combiners.
MNBCB-BUSBAR2K
2000amp positive or negative busbar with 3/8 inch studs. Used in the MNBCB-2000/200 Battery Combiner.
MNBREAKER-BB-PLUS
8 studs for multiple paralleled battery strings.
MNPV12-BUSBAR
1/8" thick tin plated copper busbar for use with the MNPV12 combiner.
MNPV6-250 BUSBAR
1/8" thick tin plated copper accommodates up to three 300VDC MidNite circuit breakers.
MNPV3-BUSBAR
This .093" thick copper bus has three fingers spaced at 1/2" (13mm) intervals
one box lug is provided to accommodate 14-1/0 AWG wire.
MNPV6-BREAKER-BB
MNPV6-BREAKER-BB This .093" thick copper bus has six fingers spaced at 1/2" (13mm) intervals
Two box lugs are provided to accommodate 14-1/0 AWG wire.
MNPV6-FUSE-BUSBAR
This .063" thick copper bus has four fingers spaced at 3/4" (19mm) intervals. One box lug is provided that accommodates 14-1/0 AWG wire.
MNGBB-BUSBAR
MidNite ground busbar 3.45" long with Green screws! Two 1/0 & seven #6 wire slots. Comes with mounting screws. Made in USA, NRTL recognized.
MNSBBN
MNSBBN - 2.3" long. Two 1/0 & four #6 wire slots. 180 amps. Comes with mounting screw& nut #10-32 x 7/8". Made in USA, NRTL recognized.
MNTBBN
MNTBBN - Without insulators. Comes with 10-32 screws. For use with the MidNite Shunt. Busbar 4.63" UL and CSA recognized. 180 amps. Made in USA.
MNSHUNT BUSBAR
Mounts on 500 shunt. Same busbar used in the Nottagutter. Four battery cable studs and six position aux terminal busbar. Shunt sold separately.