Product Categories

Accessories
Backup System Kits
Battery Accessories
Battery Enclosures
Breakers
Busbars
Charge Controllers - Brat
Charge Controllers - Classics
Charge Controllers - KID
Combiners
Combiners - AC Micro Inverter (Example - Enphase)
Combiners - Disconnecting
Combiners - Pre-Wired
E-Panel - Magnum PAE 120/240VAC
E-Panel - Magnum
E-Panel - Outback
E-Panel - Samlex
E-Panel - Schneider Conext SW
E-Panel - Schneider Electric XW
E-Panel - SMA
E-Panel - UltraLite - Use with Nottagutter
E-Panel Lite - For use with TraceSW, DR, RS etc.
Fuses/ Fuse Holders
Inverter Systems, Pre Wired - AC Coupled
Inverter Systems, Pre Wired - Grid Tie with Battery Backup
Inverter Systems, Pre Wired - Off Grid
Inverter Systems, Pre Wired - UPS (Backup Power)
Mini DC Disconnect
Nottagutter
RAPID-SHUTDOWN-SYSTEM-NEC-690.12
Small Breaker Boxes
Software
Surge Protection Devices
Transfer switches
Wind and Hydro Accessories

Busbars

NOTE:
All of Midnite Solar’s listed balance of system products qualify for the US federal tax credit when used in a new, qualifying renewable energy system.

Click on image for more info & options.
MODEL OPTIONS
MN1/0LBBC-W (Long white)
$2.50
MN1/0SBBC-W (Short white)
$2.50
MN1/0LBBC-G (Long green)
$2.50
MN1/0SBBC-G (Short green)
$2.50
MN1/0LBBC-BLK (Long black)
$2.50
MN1/0SBBC-BLK (Short black)
$2.50
These busbar insulator covers help protect from accidental shorts.

   


Click on image for more info & options.
MNTBB2-5 R, MNTBB2-5 W, MNTBB2-5 Blk
MODEL OPTIONS
MNTBB2-5 R
$22.00
MNTBB2-5 W
$22.00
MNTBB2-5 Blk
$22.00
2/0 Busbar, insulator and cover sold as unit. Has 5 wire locations, 3 take up to #6 wire and 2 take up to 2/0 wire. Available in red, white or black. Comes with mounting screws. Made in USA, NRTL recognized.

   


Click on image for more info & options.
MNTBB2-9 R, MNTBB2-9 W, MNTBB2-9 Blk
MODEL OPTIONS
MNTBB2-9 R
$25.00
MNTBB2-9 W
$25.00
MNTBB2-9 Blk
$25.00
2/0 Busbar, insulator and cover sold as unit. Has 9 wire locations, 6 take up to #6 wire and 3 take up to 2/0 wire. Available in red, white and black. Comes with mounting screws. Made in USA, NRTL recognized. For red and an R, for white add a W and for black add a B to the model number.

   


Click on image for more info & options.
MNTBB2-15R, MNTBB2-15W, MNTBB2-15BLK
MODEL OPTIONS
MNTBB2-15R
$28.00
MNTBB2-15W
$28.00
MNTBB2-15BLK
$28.00
5" 2/0 Busbar, insulator and cover sold as unit. Has 15 wire locations, 11 take up to #6 wire and 4 take up to 2/0 wire. Available in red, white and black. Comes with mounting screws. Made in USA, NRTL recognized.

   


Click on image for more info & options.
MNSBB-R, MNSBB-B, MNSBB-W
MNSBB-R, MNSBB-B, MNSBB-W
MODEL OPTIONS
MNSBB-R
$15.00
MNSBB-B
$15.00
MNSBB-W
$15.00
(Midnite Short Busbar) Shorter version of the insulated bus bars. These tin plated aluminum busbars are useful for PV+ input on the narrow OB E-Panel and for a separate PV- bus bar for charge controllers that require them. 180 amps. Four #6 and two 1/0 wire slots. Listed for US and Canada.

   


Click on image for more info & options.
MNTBB-R, MNTBB-B, MNTBB-W
MODEL OPTIONS
MNTBB-R
$17.00
MNTBB-B
$17.00
MNTBB-W
$17.00
Four 1/0 & eleven #6 useable wire slots. 180 amps. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars. Tin plated aluminum. Listed for US and Canada.

   


Click on image for more info & options.
(Previous Model Num: Tin Plated Copper Plate)
063" x 2.1" x 1.5" One 3/8", five .250, two .203" holes. Used on MNDC shunts for an additional bat minus battery connections.
$12.00
   


Click on image for more info & options.
Big Busbar
(Previous Model Num: Big Busbar Plus or Minus)
280 amps, Same busbar used in the Nottagutter. Five, 5/16 studs for battery connections. Comes with auxiliary terminal busbar for six small wires #14-1/0.

Breaker and Busbar Torque Values
$75.00
   


Click on image for more info & options.
(Previous Model Num: MNBCB Busbar)
1000amp positive or negative busbar with 3/8 inch studs. Used in the MNBCB-1000/50 and MNBCB-1000/100-Battery Combiners. Comes with red and white insulators and screws.
$140.00
   


Click on image for more info & options.
1/8" thick tin plated copper busbar for use with the MNPV12 combiner.

Current Rating: 200A

Breaker and Busbar Torque Values
$28.00
   


Click on image for more info & options.
(Previous Model Num: MNPV6-250-BUSBAR)
1/8" thick tin plated copper accommodates up to three 300VDC MidNite circuit breakers.
This bus bar is used in the MNPV6-250, The MNPV6-250Disco and two of them are used in the MNPV12-250

Current Rating: 168A

Breaker and Busbar Torque Values
$30.00
   


Click on image for more info & options.
MNPV3 BUSBAR
This .093" thick copper bus has three fingers spaced at 1/2" (13mm) intervals one box lug is provided to accommodate 14-1/0 AWG wire.

Current Rating: 60A

Breaker and Busbar Torque Values
$13.00
   


Click on image for more info & options.
(Previous Model Num: MNAC Busbar (AC Micro))
2 bus bars 1/8" thick tin plated copper accommodates up to three 240VAC MidNite circuit breakers.
These bus bars are used in the MNPV6 Disco-AC Micro

Current Rating: 168A

Breaker and Busbar Torque Values
$70.00
   


Click on image for more info & options.
MNPV6
(Previous Model Num: MNPV6-BREAKER-BUSBAR)
MNPV6-BREAKER-BB This .093" thick copper bus has six fingers spaced at 1/2" (13mm) intervals Two box lugs are provided to accommodate 14-1/0 AWG wire.

Current Rating: 120A

Breaker and Busbar Torque Values
$15.00
   


Click on image for more info & options.
MNPV6 FUSE
This .063" thick copper bus has four fingers spaced at 3/4" (19mm) intervals One box lug is provided that accommodates 14-1/0 AWG wire.

Current Rating: 80A

Breaker and Busbar Torque Values
$13.00
   


Click on image for more info & options.
MNGBB
MidNite ground busbar 3.45" long with Green screws! Two 1/0 & seven #6 wire slots. Comes with mounting screws. Made of tin coated aluminum. Made in USA, NRTL recognized.

Breaker and Busbar Torque Values

Current Rating: 180A
$12.00
   


Click on image for more info & options.
MNSBBN
(Previous Model Num: MNSBBN (NAKED) BUSBAR)
2.3" long. Two 1/0 & four #6 wire slots. 180 amps. Comes with mounting screw& nut #10-32 x 7/8". Made in USA, NRTL recognized.

Breaker and Busbar Torque Values
$10.00
   


Click on image for more info & options.
(Previous Model Num: MNTBBN (NAKED) BUSBAR)
Without insulators. Four 1/0 & eleven #6 useable wire slots. 180 amps. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars. Tin plated aluminum. Listed for US and Canada. Comes with 10-32 screws for mounting to shunt (Uses 2 of the #6 holes mentioned above). For use with the MidNite Shunt. Busbar 4.63" UL and CSA recognized. 180 amps. Made in USA.
$13.00
   


Click on image for more info & options.
SHUNT BUSBAR
(Previous Model Num: SHUNT BUSBAR)
Mounts on 500 shunt. Same busbar used in the Nottagutter. Four 3/8 inch battery cable studs and six position aux terminal busbar. Made of tin plated copper.
Shunt sold separately. 500 Amp busbar.

Breaker and Busbar Torque Values
$49.00
   

Product Search