E-Panel - Outback

Back to E-Panel - Outback
Printer Friendly Version

CLASSIC 150

Model	Price	Size	Shipping	Weight
CLASSIC 150	$925.00	14.9"L x 6"W x 4"D	19"L x 8.5"W x 6"D	12 lbs

Model	CLASSIC 150
Price	$925.00
Size	14.9"L x 6"W x 4"D
Shipping	19"L x 8.5"W x 6"D
Weight	12 lbs

DOCUMENTS

WEBINAR/VIDEOS

PHOTO DOWNLOAD

DESCRIPTION:

The Classic 150 MPPT Charge Controller is MidNite Solar's most popular model. It has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 150 has a maximum output current of 96 amps, an operating voltage of 150 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 150 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

Classic Sizing Tool
The Classics (PDF Presentation)

FEATURES:

Charges Lithium, Flooded Lead Acid, AGM and virtually any other chemistry.
150 operating voltage
Max current out: 96 amps
ETL listed to UL1741 and CSA
Type 1 environmental rating
Terminals are rated for 75 C
Exclusive HyperVOC extends VOC limits
12-72V battery
Built in DC-GFP and Arc Fault
Detector
Solar, wind and hydro MPPT modes

To ensure proper start up and MPPT operation, the minimum initial PV input voltage should be at least 30% higher than the highest expected battery voltage.

Ships with MidNite Battery Temperature Sensor (MNBTS) and printed Manual.

MidNite Solar offers an industry first, an extended warranty for all the Classic MPPT charge controllers. Six months prior to the end of the warranty period customers can ship their Classic back to MidNite Solar with a check for $147 dollars plus shipping and we will replace any wearable parts and do a general tune-up. This will extend the warranty by 2 additional years, another good reason to purchase a Classic.

Warranty - 5 yrs.
Listed by ETL for US & Canada
CE Certified Listed
FCC Class B Listed
Made in the USA

NOTE: The Classic does not support Hughes.net satellite-based communications.

California Residents: Warning

ACCESSORIES

Classic Replacement Power Boards - $470.00
Replacement FET Boards for the Classic, Classic-SL and Classic Lite.

Classic Replacement Control Boards - $350.00
Classic 150, 200, 250 replacement control board

Local Application
The MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet.

MyMidNite
My MidNite, our free, secure service allows you to view your Classic(s) when you are away from home.

MNWBJR - $81.00
The Whiz Bang Jr is a current sense module that attaches to the standard 50mv / 500A Shunt and wires into the Classic and KID charge controllers to give Amperage readings from the shunt. To use the Whizbang Jr (MNWBjr) with any of the Classic Lites, you will either need the local app or an MNGP.

MNGP - $225.00
MidNite Graphics Panel (Graphics display)

MNSPD-300-DC - $135.00
The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.

MNEDC 5A thru 100A - $27.00
5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 amp 150VDC Panel Mount. 10,000 AIC

MNEPV BREAKERS - $22.00
150VDC din rail mount breaker available in 1 to 63 amps (13mm wide).

MNEPV 80A or 100A - $65.00
80 or 100 amp Din rail mount breaker.

MNEDCQUAD - $92.00
General use aluminum enclosure for 4 panel mount type breakers from 5 - 100 Amp.

MNNWC3 - $10.75
3 foot cable for the MidNite network. Used to network MidNite products together.

MNCCB-L or MNCCB-R - $26.00
CHARGE CONTROL BRACKETS - Right/Left - Right or left hand charge control brackets. Fits OutBack, Xantrex and MidNite MPPT controllers.

MNCLASSIC FAN KIT - $54.00
These are replacement fans for use in the repair of the classic with a damaged or worn out fan.